SILVER COATED COPPER CONDUCTIVE COATING

SILVER COATED COPPER CONDUCTIVE COATING

Part Number: MG843AR

843AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It provides excellent shielding levels at high frequencies.

Can size is 340gm in 400 mL.

After the part has cured, usually 24 hours, it can now be easily plated with our Bright Acid Copper plating kit.

MG Chemicals Super Shield SILVER COATED COPPER Conductive Coating, 340g Features

• UL Recognized (File # E202609) •
• Provides effective EMI/RFI shielding over a broad frequency range
• Mild solvent system, safe on polystyrenes 
• Does not contain toluene, xylene, or MEKStronger adhesion than water based coatings
• Low VOC’s
• Median attenuation 50 dB ±25 dB per 38 μm (~1.5 mil) for frequency range of 10 to 18,000 MHz

• Theoretical Coverage @ 2 mil      3,100    cm2

See below for TDS and SDS