Scrubber Wheel COARSE 150 mm
Part Number : SCRWC6
This wheel is a 4 section wheel and uses a non woven material which is COARSE Grade. [Similar to Scotchbrite]
Maroon non woven has been developed to achieve satin effects. They are made from non woven nylon material impregnated with microfiber grit. Non woven wheels are sensitive to heat and must not run too fast.
Used for work on all metals.
Scrubber wheels remove rust, scratches, minor blemishes, old paint, and plating. A featherlite touch is required with these wheels, unlike an ordinary buffing wheel. Heavy pressure will result in premature wear of the wheel.
The blisters found in chrome, particularly on pot metal, can be flattened with this wheel. Substrates take a flat satin finish, which should be buffed with emery and a sisal wheel, followed by white or brown compound on a cotton wheel.
The wheel has a hard centre suitable for a spiral shaft, but can be drilled through to suit 1/2” & 5/8” shafts.
wheel diameter is 6" or 150mm