CHROME PLATING KITS, NICKEL PLATING KITS, ZINC PLATING KIT, COPPER PLATING KIT, GOLD PLATING, BOTH ELECTROPLATING AND ELECTROLESS PLATING. AS WELL AS POLISHING SUPPLIES AND POWDER COATING.

Caswell Plating Australia sells every plating kit possible for the home DIY plating experience. Caswell Australia provides expert local knowledge and expertise to allow the home plater using our home plating kit, powder coating guns or polishing supplies to achieve professional electro plating or metal finishing results from home.

OUR KITS ARE HERE IN AUSTRALIA WITH LOCAL AUSTRALIAN HELP AVAILABLE.

Plug N' Plate® kits aka Brush Plating

Known to many as brush plating Caswell Inc has a system known as Plug N' Plate, a process that is so highly refined it is amazing. Simply plug it in dip and swipe and you have instant plating.
Read the Instruction Manual Here.
Read An Article From Mac Life Magazine On Plating An iPod Using Our Plug N' Plate® Kits (372 KB PDF)

4 Simple Steps To Brush Plate Your Small Parts

1. Plug In The Adapter. The Australian system has specially been designed to only need one power supply for all Plug N' Plate® kits. It is also a genuine Australian plug so no adaptors are necessary.
2. Clip the Black Lead To The Part
3. Soak The Wand With Bandage In the Solution
4. Brush The Wand Over The Cleaned Part

Plug N' Plate® is a new concept in plating small parts. Our unique mains power pack supplies just the right amount of power allowing you to brush, and in some situations, dip plate your smaller components.

The Plug N' Plate® system will also allow you to patch repair areas where the original plating has worn away.

Plug N' Plate® is ideal for vintage vehicle restorers, antique collectors and dealers, and small workshops doing prototype work.

What could be simpler? The Plug N' Plate® wand is attached to the red plug on the Power Pack, and the alligator clip is attached to the work-piece. The end of the wand is covered in an absorbent bandage, which is soaked in the plating solution for a few seconds.

By simply stroking the part with swift brush strokes, the circuit is closed and the plating metal bearing solution goes to work, depositing its beautiful layer onto the object.

Plug N' Plate® is perfect for gold plating car emblems. Simply strip the chrome off with Chrome Stripper, then apply the gold. Full instructions are included.

Plug N' Plate® may be applied onto most metals. To see which kit plates onto which metal, read our instruction booklet. To plate onto Stainless Steel, use our Stainless Steel Activator first, with a stainless wand and 4.5V power pack. When gold plating onto stainless, apply our Stainless Steel Activator For Gold with a stainless wand and 4.5V power pack, then you may gold plate directly onto the stainless part.

We do not recommend plating aluminum directly with our Plug N' Plate® kits. Use our Flash Copper Kit with zincate primer first, then you may Plug N' Plate® onto the copper. To plate plastic, or other non-conductive parts, spray with Silvaspray, plate with acid copper, then use a Plug N' Plate® kit.

Plug N' Plate® is a registered trademark of Caswell Inc.

Here is just a preview of what's available in the store

Refills	Plug N' Plate® Kits	Accessories
Refills are available in the following chemical solutions: Fast GOLD 24 ct Silver Solution Brass Solution Gold Solution Bronze Solution Copper Solution Copy Chrome™ Solution Tin Solution Nickel Solution Steel Activator Zinc Solution	Plug N' Plate® Kits come with your choice of chemical solution, the power supply, appropriate wand and bandages.	The accessories that are available will mean once you are setup you will be able to plug and plate with all the chemical solutions in every application. from fine detail in copy chrome to brush plating 24ct gold.